INCH-POUND
MIL-R-22827E
30 June 1989
SUPERSEDING
MIL-R-22827D
1 April 1983
MILITARY SPECIFICATION
REFUSE CONTAINER, HOISTING UNITS
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers refuse containers suitable for use
with rear truck mounted hoist-haul mechanisms covered in MIL-T-11663, of the
make and model as specified (see 6.1).
1.2 Classification.
Refuse containers will be of the following types and
sizes, as specified (see 6.1): (See figure 1 for illustrations).
Type I - Bottom discharge, rectangular top.
Size
4
-
4 cubic yards (cu yd) net volume.
-
6 cu yd net volume.
Size
6
Size
8
-
8 cu yd net volume.
10 cu yd net volume.
Size
10
-
12 cu yd net volume.
Size
12
-
Type II - Standard bottom discharge.
Size 4 - 4 cu yd net volume.
Size 6 - 6 cu yd net volume.
Size 8 - 8 cu yd net volume.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commanding Officer (Code 156), Naval Construction Battalion Center, Port
Hueneme, CA 93043-5000, by using the self-addressed Standardization
Document improvement Proposal (DD) Form 1426) appearing at the end of this
document or by letter.
FSC 3990
AMSC N/A
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business